MTH BCR2 Battery Component Replacement PS2 Engines 3 Volt System 3V BCR2

★★★★★ 4.5 106 Bewertungen

€13.94
Preis bei Onlinekauf
Kostenloser Versand 30 Tage kostenlose Rückgabe

Verkauft und versendet von www.chezbio.com
Wir bemühen uns, Ihnen genaue Produktinformationen anzuzeigen. Hersteller, Lieferanten und andere stellen die hier gezeigten Angaben bereit.
€13.94
Preis bei Onlinekauf
Kostenloser Versand 30 Tage kostenlose Rückgabe

Wie möchten Sie Ihren Artikel erhalten?
Die ersten 30 Tage sind kostenlos! Wählen Sie den Tarif an der Kasse.
Versand
Ankunft 22.09.
Kostenlos
Abholung
In der Nähe prüfen
Lieferung
Nicht verfügbar

Verkauft und versendet von www.chezbio.com
30 Tage kostenlose Rückgabe Details

Produktdetails

Artikelnummer 227367163 Erscheinungsdatum 2026/05/09 Listenpreis €13.94 Modellnummer 227367163
Kategorie

3V BCR2 J & W Electronics Battery Component Replacement 3V (BCR2) For PS 2 Engines BCR 2, which is used in the PS2, three volt system. If your PS2 engine uses a battery pack with two AA batteries, in a blue plastic wrap, or 2 AAA batteries in a green plastic wrap or your engine has been upgraded to PS2, you can now replace that battery with the BCR 2. Check with your instruction to see if the PS2 engine uses a three volt or the instruction say: 2.4 volt battery. The BCR 2 is a permanent replacement for the battery and plugs into the battery connector. Power up your engine in neutral, at ten volts or more for one minute, and the engine will be ready to run, regardless of how long the engine has been sitting. When the BCR 2 needs to be charged, the sound volume will be lower than normal. While the BCR 2 is charging up, the sound level will return to normal, still wait one full minute, the BCR 2 will charge up and your engine will be ready to run. In command mode, run your engine for one minute and the BCR 2 will be charged. The BCR 2 will hold a charge, after turning the power off to the engine, for over a week! If you run your engine at least once a week, you will never have to wait to charge up the BCR 2. At anytime the sound level is lower than normal, the BCR 2 will need to be charged.

  • 3V BCR2 J & W Electronics
  • For PS 2 Engines
  • BCR 2, which is used in the PS2, three volt system. If your PS2 engine uses a battery pack with two AA batteries, in a blue plastic wrap, or 2 AAA batteries in a green plastic wrap or your engine has been upgraded to PS2, you can now replace that battery with the BCR 2. Check with your instruction to see if the PS2 engine uses a three volt or the instruction say: 2.4 volt battery.
  • The BCR 2 is a permanent replacement for the battery and plugs into the battery connector. Power up your engine in neutral, at ten volts or more for one minute, and the engine will be ready to run, regardless of how long the engine has been sitting.
UPC 665570248032
ASIN B01LFJD37G
Brand BCR
Voltage 3 Volts
Unit Count 1 Count
Reusability Rechargeable
Manufacturer JW ELECTRONICS
Model Number BCR2
BuiltIn Media Capacitors
Battery Weight 0.1 Ounces
Item Dimensions 0.9 x 0.6 x 0.3 inches
Antenna Location MTH Locomotives
Battery Cell Type Polymer
Number of Batteries 1 Nonstandard Battery batteries required.

Korrektur der Produktinformationen

Wenn Sie Unvollständigkeiten oder Fehler in den Produktinformationen auf dieser Seite bemerken, nutzen Sie bitte das Korrekturformular unten.

Korrekturanfrage

Kundenbewertungen

4.5 von 5
★★★★★
106 Bewertungen | 43 Rezensionen
So wird die Artikelbewertung berechnet
Alle Bewertungen anzeigen
5 Sterne
83% (88)
4 Sterne
4% (4)
3 Sterne
2% (2)
2 Sterne
1% (1)
1 Stern
10% (11)
Sortieren nach

Für dieses Produkt liegen derzeit keine schriftlichen Bewertungen vor.