Fdit Self Priming, High Rotation Speed Pressure Booster Pump 220V 50HZ Excellent Heat Dissipation for Home Use (13)

1. Premium Material: The pressure booster pump body is made of cast iron, which is aesthetically pleasing, lightweight, proof and .2. Easy to Install: The water pressure pump has a fixed base and a high rigidity bottom. The design of the mounting holes makes it easy to fix the pump to the wall on the floor, making it and secure.3. Excellent Heat Dissipation: The self priming has a fan heating wheel for efficient fan heating and long lasting efficiency of the motor.4. Convenient to Use: The self priming pump is designed with a non return valve to avoid backflow of water and to facilitate the connection of valves, pipes, etc. It is easy and to install.5. Full : Transfer pump with all copper core wire motor, long lasting work, full power double , refuse to burn machine.Spec:Item Type: Pressure Booster PumpMaterial: Cast Iron, ABSWeight: Approx. 7300g/257.5ozSize: Approx. 23x15x27.5cm / 9.1x5.9x10.8in Model: ZM-125Rated Voltage: 220V/50HZ Rate: 1.3-2m3/hRotation Speed: 2860r/minPower: 125WSuction Range: 8m/26.2ft: 15-25m/49.2-82.0ftCalibre: DN25/1 InchWidely Used In: Water Booster, High Floor Booster, Solar Booster, Water Heater Booster, Bathroom BoosterWater Tower Water BoosterHow to Use:1. The pump needs a little priming water before it initially starts, make sure you make it a priority1) Remove the cover and fill with water2) Put the cover on and open a tap3) Plug in and operate the pump, the water will come out after 3 to 8 minutes4) If water does not come out, it may be due to insufficient priming water, so add water again2. Use the pump after it has been left for a long timeDue to the solidification or bonding of dirt in the pump, even if the switch is closed, the motor may not turn.packing list:1 x Pressure Booster Pump1 x

• Full : Transfer pump with all copper core wire motor, long lasting work, full power double , refuse to burn machine.
• Premium Material: The pressure booster pump body is made of cast iron, which is aesthetically pleasing, lightweight, proof and .
• Easy to Install: The water pressure pump has a fixed base and a high rigidity bottom. The design of the mounting holes makes it easy to fix the pump to the wall on the floor, making it and secure.
• Convenient to Use: The self priming pump is designed with a non return valve to avoid backflow of water and to facilitate the connection of valves, pipes, etc. It is easy and to install.
• Excellent Heat Dissipation: The self priming has a fan heating wheel for efficient fan heating and long lasting efficiency of the motor.